
Painting with orthosis and prosthesis
Support for holding a brush and pencil and for painting and drawing with control.
Request productPainting covers a lot of ground: a child's first pictures on the kitchen table, and just as much a brush in the hand later on.
Painting usually takes both hands. One holds the paper or the pot steady while the other puts the colour on, and much of it is about covering a surface without having to think about the tool. When the grip on one side isn't secure, a brush is hard to hold, and the paper slides away. The right aid gives the affected side its own way of putting colour down. Because people manage this differently, macu4 supports it across three systems, and which one suits you depends on your situation and the base that fits you best.
Lynk Modules
How Lynk Modules support this activity
The Lynk System suits an orthotic fitting, where the grip isn't quite dependable. The base wraps the forearm in a lightweight orthosis and gives the module a reliable connection point. The flexible module head adapts to different handles and forms: a brush or a pen goes into the head. The locking mechanism of the module head keeps the angle you set instead of giving way under pressure. You can adjust the orientation individually, so the brush meets the paper at the angle you want rather than at a tilt your wrist has to correct. Before you start, check that the brush is positioned correctly and fastened securely. The module attaches to and detaches from the orthosis quickly and stays light on the arm, which counts over a long session at a table. With the brush held reliably, you need less active gripping, and the line can be guided with more control.
Explorer Modules
How Explorer Modules support this activity
The Explorer System is the route for a prosthetic fitting of the forearm in adults. The Explorer is macu4’s lightweight, 3D-printed system: a socket, the Explorer Ring as the connecting component, and a module matched to the activity. Two modules work for painting and drawing. The Hold Lock Module holds a brush, a pencil or a similar tool in a defined position. It is made for smaller, lighter objects that stay in place on their own without a clamp or strap, such as cutlery and other cylindrical objects. The integrated ball joint lets you set the angle, and the Lock version keeps the module head at that angle instead of giving way under pressure, so the brush or pencil keeps its angle as you work across a surface. The quick release makes it easy to take the module off again. The Pinch Module is the alternative when you want to adjust how firmly the tool is held. The brush or pencil sits between the module fingers, and the side button lets you set the grip force to suit its diameter. Thin pencils and brushes can also be pressed into the slot with the oval openings from above until they click into place, and the integrated ball joint lets you align the whole module. The Pinch Module can also help hold down the paper, so the sheet stays in place while the other hand paints or draws. Both modules can be configured with or without length compensation via an integrated spacer, set during measurement. When the brush or pencil is held securely, the stroke comes from the arm and the affected side takes a real part in the work.
Lumo Modules
How Lumo Modules support this activity
The Lumo System is the child-friendly solution: a cuff or socket for young users, with interchangeable modules so it can be adapted to whatever your child wants to try. Two modules suit painting. The Roll Module lets your child put colour down with a rolling movement of the whole arm rather than a fine grip, which makes it possible to cover a large sheet of paper or cardboard. One thing to know: the product is made of hard plastic, so viscous paint won't go on evenly on its own, and the simplest fix is a thin strip of foam attached to the roller, which soaks up the paint and releases it more evenly. Depending on the paint, residue may not come off the roller again, so it's worth deciding in advance which module stays the painting one. The Hold Module is the alternative for an actual brush, held in a small clamp so your child can work with a tool rather than a roller. The magnetic closure makes the system quick to put on and take off, and it stays light enough for small arms.
"For Lea, painting is her favorite thing to do after school. With the module, she holds her brush and pencil securely and can paint her pictures the way she imagines them."
User | Lea, 8
go to case studiesNo suitable module available for your system?
Please feel free to contact us! Perhaps a customised product is possible – or a new module is already in development that is perfectly suited to this activity.





